Product Range ::

  Send a Request
ROWE 198
Long-living cutting machines with adhesion-resistant profile and self-sharpening cutter head
ROWE 198 Paper Trimmer
The professional cutting machine from ROWE with manual or electrical operation permit cutting widths of up to 200 cm (79"). For oversize sheets, both sides were left open to allow the material to be pushed through and cut continuously. Aligning marks according to DIN standards on the antistatically arranged feed table and the lined pressure rail enable precise square cuts.
working width: 150 cm (59")
integrated stand
electric drive
self-sharpening and maintenance-free cutting head
automatic paper contact pressure during the cutting process
paper waste bag
cutting edge illumination
foot switch and connecting block for release of cut
roll-off device (optional)
guide ledge with scale (optional)
height adjustment (optional)
Working width in cm, ("); 150 cm, (59")
Integral stand standard
Self sharpening and maintenance-free cutting head: standard
Automatic paper pressing during the cut standard
Waste Bag standard
Removable waste bag for easy emptying standard
Pedal and actuating profile for cut triggering standard
Short key strokes to cut small sheets standard
Drive arrangement for continuous work standard
Plexiglass cover for cutting area standard
Reversing device for rear delivery of sheets standard
Cutting edge illumination standard
Guide ledge with scale optional
Roll-off device optional
Height adjustment optional
Width/Depth/Height in cm 175 x 45 x 99
Table height in cm 90
Weight with stand in kg Approx. 50
Space required in M² Approx. 0.85
Supply Voltage 230 V, 1 N AC, 50/60Hz, 0.6A
Current Consumption 140 VA

paper types - plain paper 55-250 g/m²
cardboard thickness in mm max. 0.5
PE/Foil/Film, thickness in mm max. 0.5
Laminates, thickness in mm max. 0.5
Tracing paper max. 250 g/m²
Meta foil dependent on material
Further Information
specifications Technical Specifications download Download a brouchers print Print this page